For many users who want to open a bath, it is a headache to estimate how much boiler is needed based on the number of nozzles and the amount of water used. Below, we will take 100 nozzles and an average bath temperature of 40-60 °C as an example to answer your need for boiler equipment.
When calculating the boiler capacity, it is necessary to use 100 nozzles (the highest value) at the same time as the standard, and temporarily ignore how many people use at the same time, but use the number of nozzles as the estimation unit, as long as 100 nozzles are used at the same time.
An adult bathing water is about 0.2-0.3 tons per hour, and 100 nozzles use 20-30 tons per hour. Therefore, it is only necessary to satisfy a boiler that can supply hot water between 20-30 tons per hour. Considering the various factors such as the difference in bath water temperature, we estimate that 100 bathing nozzles will require a 2 ton bath boiler. If it is necessary to carry out the heating of the bath, it is necessary to calculate according to the actual heating area. You can tell our online customer service about your heating area and bathing nozzles, and the technician will give you a detailed analysis later.
At the same time, in addition to the boiler tonnage problem, there is a need to choose fuel. It is best to use fuel or gas boilers in the baths in towns. These two types of boilers are not only environmentally friendly but also well managed, and do not require special space for fuel storage. Also pay attention to the choice of water tank. Generally speaking, the boiler and water tank should select the maximum value, which can not only meet the needs, but also effectively avoid the boiler overload operation and prolong the service life of the equipment.
