With the development of science and technology, boiler equipment and technology are also constantly developing and innovating. The electric steam boiler is a kind of boiler equipment that uses electric energy. After the boiler is running, it is a product that is completely free of pollutants and can be described as an environmental protection pioneer product.
Electric steam boiler equipment has many advantages, and at the same time, the performance of the boiler has also changed. In order to ensure the safe use of the equipment and extend the service life, many boiler technical engineers from Zhengzhou Fangkuai Boiler Co., Ltd. have accumulated years of research and accumulated correct installation and commissioning Some experience will be passed on to everyone for free now.
First of all, when the electric steam boiler leaves the factory, the staff should carefully check whether the physical quantity and the list details are exactly the same, and the integrity of the equipment must be ensured. After arriving in the installation environment, the equipment and components need to be placed on a flat and spacious ground to avoid damage to the brackets and sockets. It is also very important that after the electric steam boiler is fixed, you should carefully check whether there is a gap in the place where the boiler is in contact with the base, ensure that the seams are tight, and that the gaps must be filled with cement. When installing, the most important part is the electrical control cabinet. You need to connect all the wires in the control cabinet to each motor before installing.
Secondly, before the electric steam boiler is officially put into use, a series of commissioning tasks need to be carried out. The two key steps are to raise the fire and supply the gas. The fire can only be carried out after a comprehensive inspection of the boiler without any leaks in the equipment. During the process of the fire, the temperature must be strictly controlled, and the temperature must not be increased too quickly to avoid uneven heating of each component and affect the service life. At the beginning of the air supply, the heating pipe operation must be performed first, that is, the steam valve is slightly opened to allow a small amount of steam to enter, which has the effect of preheating the heating pipe, and at the same time, pay attention to the normal operation of each component.
After the above steps, the electric steam boiler can basically be used normally.
