Although the boiler is relatively large, it is still a relatively sophisticated facility. If the boiler is not properly operated or has a little knowledge, it is easy to malfunction during the operation and lead to dangerous situations. So, in the boiler equipment, what do the parameters such as 20T and 30T mean? Let Zhengzhou Fangkuai boiler manufacturer tell you.
20T and 30T refer to the output of a steam boiler, that is, the rated evaporation capacity "30T" means that the rated evaporation capacity per hour is 30 tons of steam. The hot water boiler uses megawatts to indicate the output of the boiler. 0.7 MW is equivalent to that of a 1T steam boiler. Contribute!
In industrial boilers, the concept of steam drum refers to the pressure drop or rise caused by the circulation of water. It can also be understood that the steam drum is the pressure change formed by the fusion of gas and moisture. The air and water molecules in the ultimate pressure will increase the pressure of the gas. , Resulting in a pressure set molecule generated after the high pressure reaches a certain value. In the industry, the steam drum tank is an industrial equipment that can withstand the air pressure and water pressure generated by the steam drum.
The furnace wall itself is one of the tightly enclosed work contents of the boiler. That is to say, including refractory masonry, furnace walls, heat preservation and other structural work other than pressure components.
The tight-fitting closure of the boiler body is a structure installed on the outermost side of the boiler body, which is mainly composed of a supporting bent plate, a thermal insulation wall plate and self-tapping screws.
The main function of the tight-fitting closure of the boiler body is to make the whole boiler both tight and beautiful, so it is very important. For open-air boilers without a boiler room, the use of a tight-fitting enclosed structure protects the boiler equipment from wind and rain.
