Protective measures that electric boilers must take

Protective measures that electric boilers must take

In recent years, more and more users have begun to use electric heating boiler equipment. On the surface, people are beginning to realize the importance of environmental protection and energy conservation. The electric boiler produced by FANGKUAI Boiler is clean and environmentally friendly, pollution-free, noise-free and fully automatic because it has no combustion chamber and chimney. It is widely loved by users.

The various components of the electric steam boiler are made of different materials.
       1. In order to prevent electrochemical corrosion, cathodic protection measures must be taken.
       2. For the sewage treatment of the electric boiler, the sewage at the bottom of the boiler can prevent the condensation of the smoke. Flue gas condensation is caused by moisture in the flue gas (diesel or natural gas) and the temperature of the flue gas is too low. Some of this moisture is removed from the chimney, some is absorbed by the chimney wall, and the rest is deposited at the bottom of the chimney.
       The amount of water produced is affected by the following factors: the flue gas temperature (to achieve 91% thermal efficiency, the flue gas temperature needs to reach 170 °C), the total surface area of ​​the chimney, the material of the chimney and the insulation of the chimney. Burner repair. Maintenance of electric steam boilers and burners, after steam supply for maintenance. Because the products of combustion corrode the boiler and clean up the carbon deposits, the combustion products must not be left in the boiler for too long.
       3. The necessary content for electric boiler cleaning.
       When using the electric boiler, first open the burner door, remove the rear outer casing panel, unscrew the screw on the cleaning side of the electric boiler, clean the gas pipe with a wire brush, and clean the combustion chamber with a soft brush.
       The electric boiler removes the residue from the boiler, screws the cleaning port, closes the burner door, and checks whether the seal is complete.
       4. If the electric boiler is installed in an area where the temperature is below 0 °C, the following protective measures must be taken. If the electric boiler room is outdoors, the indoor temperature is lowered to 15 ° C or 18 ° C, so that the electric boiler runs all day. If there is no one in the room for a long time, the water in the electric boiler should be drained and the boiler should be stopped.

company news