The hourly cost of the 6-ton steam boiler includes fuel costs, water, electricity, etc. The consumption of water and electricity is relatively small, which can be ignored here, and the focus is on the level of fuel costs. The main factor that affects fuel costs is the operating cost of the boiler.
The 6-ton steam boiler launched by Zhengzhou Fangkuai Boiler Factory adopts wing energy-saving technology, and its operating efficiency per hour can reach more than 98%. It ranks in the forefront of the entire boiler market, so the cost per hour is also very low, which is very popular among users. . At present, the hourly cost of this type of boiler is around US$70.
Zhengzhou Fangkuai Boiler Factory is here to remind everyone that sometimes steam boilers will produce uneven heat during operation. The specific reasons may be as follows:
Thermal unevenness is the phenomenon of uneven thermal load in the same heating surface tube group. Thermal unevenness can be caused not only by structural characteristics, but also by boiler operating conditions. Such as the uneven distribution of smoke temperature and smoke velocity along the width of the flue; the uneven plane or uneven spacing of the serpentine tubes on the heating surface causes the flue gas corridor; the accumulation of ash, slagging on the heating surface, and the deflection of the furnace flame center; Poor adjustment of the running operation will cause the flame to deflect, move down, and raise, etc., which will cause uneven heat.
(L) Ensure that the steam parameters reach the rated and stable operation.
(2) Ensure that the fire is stable, the combustion center is appropriate, the flame is evenly distributed, and the equipment is not burned out, so as to avoid ash accumulation and coking.
(3) Make the boiler and unit operate safely under the most economical conditions.
