Gas-fired boilers are very popular among users among all boiler models on the market, and their market share is also increasing year by year. Gas-fired boilers use natural gas as fuel. Compared with coal-fired boilers, the layout of the boiler room is much simpler. It only needs to be connected to water, electricity, and gas pipelines. But you still need to pay attention to some problems when arranging the gas boiler room, Zhengzhou Fangkuai Boiler Factory will answer for you.
There are many design requirements for gas boiler rooms, many of which can be based on the design steps of general boiler rooms, but the following points need to be paid attention to in the design of gas boiler rooms:
1. The boiler room should be prepared for water accumulation.
2. The floor of the boiler room should be flat without steps.
3. The arrangement of equipment in the boiler room should be easy to operate, unobstructed and inspected.
4. The boiler room should have adequate lighting, excellent ventilation, and necessary cooling and antifreeze tools.
5. The load-bearing beams and columns of the boiler room should be separated from the gas boiler or contain other equipment to prevent damage by high temperature.
6. Adequate lighting should be provided at the operating locations and water level gauges, pressure gauges, thermometers, flow meters, etc. in the boiler room. The boiler room should be equipped with spare lighting equipment.
7. The door to the outside of the boiler room should be opened outwards, and it is forbidden to lock or bolt during the operation of the gas boiler. The door of the working room or survival room in the boiler room should be opened to the inside of the boiler room. The revenue and expenditure outlets and passages of the boiler room should be unobstructed.
