Compared with ordinary boilers of manufacturers on the market, CNC boilers are more intelligent and easier to operate, which saves labor costs and makes people more comfortable to use. Compared with ordinary boilers, what are the advantages of CNC boilers? Zhengzhou Fangkuai Boiler Factory will answer for you.
Common points of ordinary boilers and numerical control boilers: the heating surface is called the boiler, the combustion chamber is called the furnace, and both have temperature, pressure and flow detection instrument probes. The difference is the control method and the method of executing the control instruction.
Ordinary boilers read the test instrument data manually and then use brain knowledge and experience to judge whether the terms of the technical specification and operating procedures deviate from it? The deviation direction is becoming bigger and smaller, becoming positive and negative? Then adjust the deviation manually.
The numerical control boiler adopts the program controller to automatically collect the test data of the process parameter probe and compare the memory setting data. After the comparison calculation, the electric or pneumatic actuators are used to operate such as automatic water filling, automatic coal filling and oil filling, and automatic air filling. Being unattended is the main advantage. Domestic gas-fired hot water boilers are all such things. After ignition and operation, you only need to set the hot water outlet temperature at about 50-60 degrees to maintain the room temperature above 20 degrees. Winter heating is not suitable.
