Greenhouse planting technology allows us to eat green vegetables even in the cold winter, and one of the equipment to ensure that the greenhouse can still maintain a constant temperature in winter is the hot water boiler. Only one easy-to-use hot water boiler can maintain the needs of all the greenhouses throughout the winter, allowing users to worry and rest assured. What type of hot water boiler is better for greenhouse planting? The professional Zhengzhou Fangkuai boiler manufacturer will answer for you.
Generally speaking, the capacity of the hot water boiler should be determined according to the area of the greenhouse, so that the appropriate boiler equipment can be purchased. At the same time, it is necessary to choose the model of the hot water boiler according to the structure of its own boiler room, whether it is horizontal or vertical. Of course, the operating efficiency of the boiler cannot be ignored. A good hot water boiler has a very high operating efficiency. It can save at least one hundred thousand to several hundred thousand yuan in fuel costs over the entire winter.
Therefore, Zhengzhou Fangkuai Boiler Factory recommends that if you need to use a hot water boiler, it is best to contact a professional boiler manufacturer, and its skilled boiler engineer will formulate a detailed boiler systemization plan, including auxiliary equipment and boiler room layout. , Quotation and more information.
At the same time, everyone should pay attention to the fire separation range when designing the boiler room.
1. The boiler room is a Category D production plant. When the rated evaporation capacity of the steam boiler is greater than 4t/h, and the rated output of the hot water boiler is greater than 2.8MW, the boiler room building should not be lower than the Class II fire resistance level; the rated evaporation capacity of the steam boiler is less than or equal to When the rated output of 4t/h and hot water boiler is less than or equal to 2.8MW, the boiler room building shall not be lower than the third-class fire resistance level;
2. The oil tank room, the oil pump room and the oil heater room are all category C production plants, and their buildings should not be lower than the second-class fire resistance level. When the above rooms are arranged in the auxiliary rooms of the boiler room, a firewall should be set up to separate them from other rooms;
3. The gas pressure regulating room is a Class A production plant, and its building should not be lower than the second fire resistance level. The pressure regulating room adjacent to the boiler room should be separated from the boiler room by a firewall, and its doors and windows should be opened outwards. Directly lead to the boiler room, and the floor should be a non-sparking floor.
