With the arrival of autumn, the boiler industry has also ushered in new technological developments and policy orientations. This article will provide an overview of the latest boiler knowledge in September from the aspects of technological innovation, policy impact, energy conservation and environmental protection, and safety supervision.

1. Technological innovation and application

In September, technological innovation in the boiler industry continued to develop in depth. The application of intelligent technology has become a hot spot in the boiler industry. By installing sensors, data acquisition equipment and advanced algorithms, the intelligent monitoring system can realize real-time monitoring and analysis of key parameters of boiler operation, and improve the safety and reliability of boilers. The application of non-contact monitoring technologies such as infrared thermal imagers is also becoming increasingly widespread. These technologies not only improve monitoring efficiency, but also reduce the inconvenience caused by boiler shutdown and disassembly.
In addition, automatic control systems have gradually become mainstream. By installing sensors and actuators and equipping them with advanced control algorithms, the level of automatic control of boilers has been greatly improved, reducing the risk of human operating errors. The application of visual recognition technology has also further improved the safety control level of boilers, and can detect and identify boiler water levels, combustion conditions and pipeline connections in real time.

2. Policy influence and orientation

In September, the boiler industry continued to be influenced and promoted by national policies. The "Guiding Opinions on Coordinating Energy Conservation and Carbon Reduction and Recycling and Accelerating the Renovation of Products and Equipment in Key Areas" jointly issued by the National Development and Reform Commission and nine other departments and its accompanying "Guidelines for the Implementation of Boiler Renovation and Recycling (2023 Edition)" have pointed out the direction for the development of the boiler industry. These policies emphasize the need to continuously improve the supply capacity of high-efficiency and energy-saving boilers, orderly implement energy-saving and carbon-reduction transformation of operating boilers, gradually eliminate inefficient and backward boilers, and strengthen the research and development and application of cutting-edge technologies.

At the same time, the State Administration for Market Regulation also issued the "Implementation Opinions on Implementing the Action Plan for Green, Low-Carbon and High-Quality Development of Boilers", which proposed a number of specific measures, including eliminating old and inefficient boilers, promoting boiler technology innovation, supporting boiler renovation, and implementing use management responsibilities. The implementation of these policies will significantly improve the operating efficiency of boilers and promote the green and low-carbon development of the boiler industry.

3. Energy Conservation, Environmental Protection and Green Development

Against the backdrop of global carbon neutrality, energy conservation, environmental protection and green development in the boiler industry are particularly important. Traditional fossil fuels such as coal and oil are gradually being replaced by clean energy such as natural gas, biomass and solar energy. Biomass boilers and solar boilers will occupy an important position in the future market with their renewability and environmental protection.

In addition, improving the energy efficiency of boilers is also an important direction for energy conservation and environmental protection. By strengthening combustion, reasonably distributing air, and ensuring the quality of coal, the incomplete combustion heat loss and smoke exhaust loss of the boiler can be significantly reduced, and the thermal efficiency of the boiler can be improved. At the same time, the use of advanced energy-saving technologies and equipment, such as waste heat recovery systems and high-efficiency heat exchangers, can also further reduce the energy consumption of the boiler.

4. Safety supervision and operation and maintenance management

In September, new progress has been made in the safety supervision and operation and maintenance management of boilers. With the development of intelligent technology, the safety monitoring and early warning system of boilers has been increasingly improved. By real-time monitoring of the operating parameters and status of the boiler, potential safety hazards can be discovered and warned in time to ensure the safe operation of the boiler.
In terms of operation and maintenance management, key links such as boiler startup, boosting, paralleling, fire suppression, fire raising, and switching equipment need to be strictly and carefully inspected and prepared. At the same time, strengthening the sense of responsibility and professional training of operators and improving their ability to grasp the operating parameters and status in real time are also important measures to ensure the safe and efficient operation of boilers.

In addition, regular maintenance and upkeep of the boiler is also essential. By regularly checking and replacing wear parts, cleaning up ash and slag, the boiler can be kept in good operating condition and its service life can be extended.

Conclusion

In September, the boiler industry has made new progress in technological innovation, policy guidance, energy conservation and environmental protection, and safety supervision. In the future, with the continuous development of science and technology and the continuous promotion of policies, the boiler industry will develop in a more intelligent, green and efficient direction.