T6 vacuum hot water boiler: the preferred solution for efficient, energy-saving and environmentally

In today's society, with the increasing awareness of environmental protection and the increasingly tense energy consumption, it is particularly important to choose an efficient, environmentally friendly and safe heating equipment. With its unique advantages and excellent performance, T6 vacuum hot water boiler has become the ideal choice for many users. This article will introduce in detail the use of T6 vacuum hot water boiler and its significant advantages.

1. How to use T6 vacuum hot water boiler

Device operation: Before the boiler is put into operation, a comprehensive inspection of the boiler and its ancillary equipment should be carried out, including mechanical integrity and safety, specifications and sealing of the piping system, grounding and insulation resistance of the electrical system, etc. Ensure all equipment complies with national standards and usage requirements.
Start-up and shutdown: Before starting, it is necessary to correctly drain the water, clean the boiler according to the operating instructions, and check the weather conditions. After startup, the operation should be carried out in strict accordance with the prescribed steps to avoid unauthorized adjustment of control parameters. When an abnormality is discovered during boiler operation, the boiler should be shut down immediately and the emergency shutdown device should not be used casually.
Daily operation: In daily use, active maintenance should be carried out, such as regular sewage discharge, inspection of safety valves and pressure gauges, etc. At the same time, pay attention to the surrounding environment and maintain good ventilation to avoid potential safety hazards. Parameters such as water temperature, water pressure, and electrical equipment protection must be managed in a standardized manner. Debris must not be piled around the boiler to keep the site dry and clean.
Emergency handling: In the event of an emergency, the boiler and corresponding supporting equipment should be shut down immediately, the fuel and power supply should be cut off, the boiler's emergency shutdown device, such as safety valves, etc. should be activated, and the alarm should be called immediately to seek assistance from relevant professionals.

2. Significant advantages of T6 vacuum hot water boiler

High efficiency and energy saving: T6 vacuum hot water boiler adopts advanced combustion technology, which can fully burn fuel, improve thermal efficiency and reduce energy consumption. Compared with traditional boilers, it can save a lot of energy costs and create greater economic benefits for enterprises.
Environmental protection and safety: The boiler adopts a fully enclosed combustion method, and the flue gas undergoes multi-stage purification treatment before being discharged, which complies with national environmental protection standards. At the same time, the boiler adopts an intelligent control system, which can realize functions such as automatic start and stop, automatic temperature adjustment, etc., which greatly improves the safety and reliability of use.
Flexible and stable: T6 vacuum hot water boiler is suitable for a variety of fuels, such as natural gas, liquefied petroleum gas, etc., and can be customized according to customer needs. At the same time, the boiler adopts a modular design and can easily operate multiple units in parallel to ensure the stability and reliability of the heating system.
Easy maintenance: The boiler has a simple and compact structure, making it easy to install and maintain. The professional after-sales service team ensures that customers receive timely technical support and solutions during use.
Safe and reliable: The internal pressure of the vacuum boiler is always in a vacuum state, avoiding dangers such as expansion, explosion, and rupture. At the same time, a high degree of automated control makes operation easier and reduces the risk of human error.
Long service life: Since oxygen corrosion and scaling are not easy to occur inside the vacuum boiler, its service life is relatively long, generally up to more than 20 years.
To sum up, the T6 vacuum hot water boiler has become a popular heating equipment on the market due to its significant advantages such as high efficiency, energy saving, environmental protection and safety, flexibility and stability, easy maintenance, safety and reliability, and long service life. Whether for home users or corporate customers, choosing T6 vacuum hot water boiler will be the preferred solution to achieve efficient, environmentally friendly and safe heating.

Previous Article Next Article

"Fangkuai Cup" Most Beautiful Boiler Room Photography Competition officially launched

On November 15, the "Fangkuai Cup" Most Beautiful Boiler Room Photography Competition hosted by Fangkuai Boiler was officially launched. Following the great success of the previous two competitions and the widespread attention of the society, this competition is themed "Intelligent Manufacturing, Creating Beauty", aiming to capture the unique charm of modern boiler rooms through the lens and show how they are reborn in energy conservation, emission reduction and green transformation.

With the advent of the Industrial 4.0 era, the role of boiler rooms as an important part of energy supply has changed from a simple heat conversion center to a modern facility that integrates high efficiency, environmental protection and intelligence. Each boiler room is the crystallization of intelligent manufacturing wisdom.

Fangkuai Boiler looks forward to witnessing the gorgeous transformation of industrial manufacturing with you and promoting the attention and support of the society for green energy solutions. Let us wait and see who will stand out and record the "most beautiful boiler room" of this era!

The J-35A made its debut at the 15th China Air Show in Zhuhai, Fangkuai will help!

On November 12, the 15th China International Aerospace Expo opened in Zhuhai. Cutting-edge technologies and innovative breakthroughs in the fields of aerospace and defense science and technology gathered here, bringing a "air, space, sea and land" cutting-edge equipment. A feast of dynamic presentations. Among them, the much-anticipated stealth fighter J-35A made its debut at this air show. It is a new generation stealth multi-purpose fighter developed by the Shenyang Aircraft Design Institute of the Aviation Industry Corporation of China and produced by the Aviation Industry Corporation of China Shenyang Aircraft Company. The integrated design of aerodynamics, structure and stealth makes it a very comprehensive medium-sized stealth fighter.
Compared with the US military's "F-35", the "J-35" is faster, has a higher bomb load, and is heavier. In addition, it has a large combat radius, so it needs to be equipped with a very powerful engine. At the same time, the length of the aircraft carrier deck is limited. If the fast and heavy "J-35" is to be able to take off and land smoothly, it must be equipped with an electromagnetic ejection system.
As a diversified and technology-based global industrial boiler brand, Fangkuai Boiler has reached an important strategic partnership with Shenyang Aircraft Group. Fangkuai's multiple 50t/h water tube saturated steam boilers are currently stationed at the Shenyang Aircraft Group Aerospace City Heat Source Plant project site. , the first ignition was successful and put into use smoothly.

The water tube steam boiler provided to Shenyang Aircraft Group this time adopts Fangkuai's latest combustion technology and intelligent control system, and will be widely used in multiple production and living areas of the aerospace city to provide stable and efficient thermal energy support for the park. At the same time, the emission of pollutants is significantly reduced, which is highly consistent with the Shenyang Aircraft Group's pursuit of green and sustainable development, and jointly promotes the mutual transformation and application of aerospace industry manufacturing and civil industry manufacturing technologies.
Fangkuai Boiler provides Shenyang Aircraft Group with a full range of services from design, installation to post-maintenance, ensuring the stable operation of the boiler system and helping Shenyang Aircraft Group achieve a win-win situation of economic and environmental benefits while ensuring the needs of national defense construction.
Over the years, Fangkuai Boiler has always kept in mind the mission of a national enterprise, adhered to the path of self-reliance and independent innovation, and provided strong support for the "national importance" with a series of cutting-edge technologies. With great ambitions, we can fight against the sky thousands of miles away. In the future, Fangkuai Boiler will continue to empower products with revolutionary and breakthrough results, and continue to contribute to the research and development of cutting-edge equipment in "air, space, sea and land"!

T6 vacuum hot water boiler successfully sent to Xinjiang: opening a new era of efficient heating

One: Technological innovation, T6 vacuum hot water boiler leads the industry trend
Today, energy utilization and environmental protection are increasingly valued. With its excellent technical performance and environmental protection characteristics, T6 vacuum hot water boiler has become a leader in the heating industry. The boiler adopts advanced vacuum technology, which effectively improves thermal efficiency, reduces energy consumption, and reduces emissions, contributing to environmental protection. The successful shipment of T6 vacuum hot water boiler to Xinjiang not only marks another technological innovation of the product, but also indicates that the heating industry will usher in a revolutionary change.
Two: Strong adaptability, T6 vacuum hot water boiler perfectly integrates into the Xinjiang environment
The climate in Xinjiang is changeable, the temperature difference is large, and the requirements for heating equipment are extremely high. With its excellent adaptability and stability, T6 vacuum hot water boiler has successfully overcome the harsh natural environment in Xinjiang and provided stable and efficient heating services for local residents. The boiler adopts an advanced control system that can automatically adjust the heating parameters according to the ambient temperature and user needs to ensure that the heating effect is optimal. At the same time, its unique structural design also enables it to maintain normal operation under extreme weather conditions, providing strong support for the heating industry in Xinjiang.
Three: Energy conservation and emission reduction, T6 vacuum hot water boiler helps Xinjiang's green development

Under the current background of global climate change and energy crisis, energy conservation and emission reduction have become an inevitable trend of social development. With its high efficiency and environmental protection characteristics, T6 vacuum hot water boiler has become an important choice for Xinjiang to achieve green heating. The boiler has greatly improved energy utilization, reduced carbon emissions and environmental pollution by adopting advanced combustion technology and heat recovery system. At the same time, its intelligent control system can also monitor the operating status of the boiler in real time, discover and solve problems in time, and ensure the safety, stability and efficiency of the heating process.
Four: Service upgrade, T6 vacuum hot water boiler provides all-round guarantee
In order to ensure the stable operation of T6 vacuum hot water boiler in Xinjiang, the manufacturer provides a full range of service guarantees. From equipment installation, commissioning to operation and maintenance, troubleshooting, every link has professional technicians to provide technical support and services. In addition, the manufacturer has also established a complete after-sales service system to ensure that any problems encountered by users during use can be solved in a timely and effective manner. This all-round service guarantee not only improves user satisfaction and trust, but also lays a solid foundation for the promotion and application of T6 vacuum hot water boilers in Xinjiang.
Five: Looking to the future, T6 vacuum hot water boiler opens a new chapter in Xinjiang heating
With the continuous development of Xinjiang's economy and the improvement of people's living standards, the demand for heating services will also increase. The successful shipment of T6 vacuum hot water boilers to Xinjiang not only provides local residents with a more efficient and environmentally friendly heating method, but also injects new vitality and impetus into the heating industry in Xinjiang. Looking to the future, we have reason to believe that, driven by science and technology and guided by policies, T6 vacuum hot water boilers will play a greater role in Xinjiang and create a warmer and more comfortable living environment for local residents. At the same time, it will also become a business card for the heating industry, leading the entire industry to develop in a more efficient, environmentally friendly and intelligent direction.

Fang Kuai was invited to give a speech at the main forum of the National HVAC Conference with 2,000

It is autumn season, let's go to the beautiful scenery of lakes and mountains. From October 21st to 25th, the 24th National HVAC Refrigeration Academic Annual Conference with the theme of "Warming the Future and Developing Together" was successfully held in Huzhou, Zhejiang.

Fang Kuai was invited to attend this academic annual conference and give a sharing report. Nearly 2,000 representatives from design institutes, universities, research institutes, and equipment manufacturers gathered together to discuss new academic research results and guide the new direction of industry development. Jiang Yi, an academician of the Chinese Academy of Engineering and a professor at the Building Energy Conservation Research Center of Tsinghua University, and Xu Wei, a national engineering survey and design master and chief scientist of the China Academy of Building Research, attended the annual conference.

Special honors crowned, highlighting the brand's hard power! Fang Kuai was awarded the "Special Contribution Award for Academic Activities" at the 24th National HVAC Refrigeration Academic Annual Conference (2024) for its contribution to academic research. This is not only a recognition of Fang Kuai's contributions in the past stage, but also a spur at the beginning of a new stage. During the conference forum, Fangkuai R&D Director Ms. Lu Jie was invited to share special reports at the main forum and special technical exchange meeting of the conference. She gave speeches entitled "System Application of Flue Gas Source Heat Pumps in Various Heat Recovery Scenarios" and "Current and Future Low-carbon Solutions for Central Heating", which received wide attention and high recognition from the guests.

At the conference, Fangkuai set up a special booth to display the Duao D6 double-effect deep condensing vacuum hot water boiler solution, which reflected Fangkuai's ingenuity and leading technology in the field of multi-energy coupled heating, attracting many guests and expert representatives to stop and communicate.

Fangkuai has not forgotten its original intention, and has continuously increased its investment in technology research and development, and has maintained close contact with industry experts and scholars to work together to create a beautiful future of energy-saving, efficient and sustainable development, and help achieve my country's "carbon peak and carbon neutrality" goals!

1050KW hot water boiler: a thermal equipment that emphasizes both high efficiency and environmental

The two newly signed 1050KW hot water boilers have become the leaders of modern heating systems with their high efficiency, high safety and environmental protection characteristics. The following are the main features of the 1050KW hot water boiler:

1. High efficiency

The rated thermal power of the 1050KW hot water boiler is as high as 1.05MW, that is, 1050KW, which means that it can quickly heat up in a short time and generate a large amount of heat energy to meet the hot water needs of large industrial or commercial places. Its design thermal efficiency, whether it is fuel oil or gas, has reached an extremely high level, 97.64% and 97.35% respectively, and some models even have a thermal efficiency of more than 108%, which indicates the excellent performance of the boiler in thermal energy utilization. In addition, the heat exchange area of the boiler totals 36.2㎡, which ensures efficient heat energy conversion and makes the heating effect more outstanding.

2. High safety

The 1050KW hot water boiler adopts a vacuum design, and the rated working pressure of the body is -0.02MPa, presenting a negative pressure state, which not only improves the safety of the equipment, but also ensures a stable supply of hot water. At the same time, the boiler is also equipped with an intelligent control system that can automatically adjust the temperature to ensure stable and energy-saving heating. In addition, its secondary water rated working pressure reaches 1.0MPa, ensuring the stability and safety of hot water during transportation.
3. Environmental protection and energy saving

The gas-driven mode of the 1050KW hot water boiler is not only clean and environmentally friendly, but also greatly reduces the operating cost, which is in line with the sustainable development concept of modern society. Its low-nitrogen condensation technology makes the emission of carbon monoxide, nitrogen and oxides cleaner, fully meeting the strict flue gas emission standards. In addition, the boiler can also operate intelligently according to the heat demand, adjust the input power at any time, and achieve energy-saving effects.

4. Stable heating

In actual application, the 1050KW hot water boiler provides stable and reliable heating services for many buildings. Whether it is a residential area, school, hospital or commercial complex, it can quickly adapt to various heating needs and create a warm and comfortable living environment for the people. Its outlet water temperature is as high as 75℃ (or 85℃), and the inlet water temperature is set to 50℃ (or 60℃). This temperature difference ensures the efficient use of hot water.

5. Exquisite design

The 1050KW hot water boiler has an exquisite design, compact structure, small footprint, and is easy to install and maintain. Its equipment size is reasonable and easy to transport. At the same time, the boiler is also equipped with a hot water circulation pump and an electronic control system to ensure the efficient operation of the entire system.

In summary, the 1050KW hot water boiler has become the preferred equipment for modern heating systems with its high efficiency, high safety, environmental protection and energy saving, stable heating and exquisite design. In the future, with the continuous advancement of technology and the expansion of application fields, it will play a more important role in the heating field and bring a more comfortable life experience to the general public.

Introduction to 1400KW hot water boiler: a perfect combination of high efficiency, safety and enviro

The newly signed 3 1400KW hot water boilers, as the core equipment for high-efficiency heating and hot water supply, demonstrate the outstanding achievements of modern boiler technology. The following are the main features of these hot water boilers:

1. High-efficiency heat output

The rated thermal power of 1400KW ensures that these boilers have strong heat output capacity. Whether it is large-scale commercial applications or industrial needs, they can complete heating tasks quickly and effectively. The design thermal efficiency is as high as 98.1%, which is the best among similar products, demonstrating its efficient energy utilization ability. Through efficient electric heating, every bit of electrical energy is converted into thermal energy, greatly reducing energy waste.

2. Safe and stable operation

The rated working pressure is set to 0MPa, highlighting the safety and stability of its normal pressure operation. No additional pressure management is required, and it is more secure to use. At the same time, the electrical protection level reaches IP33, which effectively prevents dust and water droplets from intruding, further ensuring the safe operation of the equipment.

3. Environmental protection and pollution-free

These hot water boilers use electricity as the combustion medium, which is pure and pollution-free, in line with the trend of the times of green environmental protection. When running, they will not release a lot of smoke or discharge slag, and there is no noise, so they are very environmentally friendly.

4. Intelligent control

These boilers are equipped with fully automatic intelligent control technology, without the need for personnel on duty. They can be set to manual or automatic mode, and can automatically start or stop the water pump and circulation pump when the load changes, which improves the convenience and efficiency of operation.

5. Compact design saves space

The compact design with a body size of 293017201440 mm not only saves installation space, but also highlights the exquisiteness and practicality of the design. This design makes these boilers more flexible and convenient in layout and installation.

6. Modular design for easy maintenance

These boilers adopt modular design, with a single group power of 75KW and a total of 20 groups of heating units. This design not only improves the flexibility and scalability of the boiler, but also facilitates daily maintenance and overhaul.

In summary, the 1400KW hot water boiler meets the diverse hot water needs with its high efficiency, safety, environmental protection and intelligence. They are ideal for modern hot water supply systems and provide a reliable solution for commercial and industrial applications.

Tel:0086-371-60922096

T6 vacuum hot water boiler: the preferred solution for efficient, energy-saving and environmentally