With the elimination and transformation of large-scale coal-fired boilers, “coal to gas” and “coal to electricity” have become popular transformation methods. The electric boiler is clean, environmentally friendly and pollution-free, which helps to promote China's energy conservation and environmental protection policies, which can bring many benefits to both the country and the individual. For power consumption of electric boilers, it has become one of the most concerned issues for users. So, how can electric boilers be more energy efficient in use? FANGKUAI Boiler will share with you this knowledge.
Reasons for the large power consumption of electric boilers
1. The house insulation effect is poor
If the poor insulation effect of the room where the electric boiler is installed will directly lead to temperature loss, if you want to reach the predetermined temperature, you can only debug the boiler to reach a higher temperature to make up for the lost temperature, which will waste more energy.
2. The house is much higher
When the the house is much higher, the area of heat sharing will be larger, so that to achieve a higher indoor temperature, it is necessary to adjust to a higher indoor temperature.
3. Unreasonable geothermal laying
When the floor heat is laid, the insulation layer under the geothermal pipe is too thin (less than 3 cm), or the plane above the geothermal pipe is too thick (more than 5 cm). The heat does not conduct well, directly causing the loss of heat, so that the electric boiler needs to provide more heat.
4. Electric boiler can not do intelligent regulation
Some electric boilers are not equipped with intelligent control equipment. They need to be manually regulated during operation, and the operation steps are complicated and cannot be adjusted in time according to temperature requirements.
The electric boiler produced by FANGKUAI Boiler is mainly composed of boiler body, electric control box and intelligent control system. It can be fully automatic after power supply, and the user can adjust the running state according to the demand of temperature. The direct thermal heating tube is used in the structural design, which is convenient for replacement and maintenance.
For more information on electric boilers, you can contact the us directly via an online telephone.