For industrial boilers, the level of operating efficiency will directly determine the overall cost of operating boiler equipment. The higher the operating efficiency, the lower the operating cost of the boiler, and the higher the operating cost. Most industrial boilers have large tonnages. The larger the tonnage, the greater the difference in operating costs. Therefore, when using industrial boilers, not only do you have to choose good quality boilers, but also pay attention to methods in subsequent operations to improve boiler efficiency.
Zhengzhou Fangkuai Boiler Factory tells you: if you want to improve the efficiency of industrial boilers, you can achieve them in two ways. One is to adjust the operation mode of the boiler to minimize various losses; but to appropriately increase the steam parameters of the boiler, and Appropriately reduce the amount of boiler cooling water and blowdown.
Before the operation of the industrial boiler, the oven operation is also required. This step is to allow the boiler to heat up slowly, so as to avoid excessive temperature difference stress caused by the rapid heating of the bottom of the furnace, and further damage the furnace or cause the furnace to burst. This is also a protection for the boiler.
Industrial boilers are widely used, and can be used normally in these industries such as manufacturing, mining, construction and power heating industries. The factories that can be used include textile mills, garment factories, garment factories, printing and dyeing factories, and beverage factories. , Soy Products Factory, Meat Products Factory, Canned Food Factory, Winery, Pharmaceutical Factory, Packaging Factory, Building Material Factory, Paint Factory, etc. In addition, this kind of boiler can also be used in hospitals, schools, large supermarkets, hotels, restaurants, swimming pools and other places.
From the professional point of view, the boiler ignition of industrial boilers is for heating, combustion and transition to normal combustion. The heating is to heat the material layer to a certain temperature for burning and other work. For all of us, we should know these three stages of boiler ignition, so that the boiler ignition can be carried out smoothly.
